Gold Fingers PCB | YMSPCB
Gold Fingers PCB is the gold-plated terminal of the side card connector. Usually, the Fingers are made of flash Gold (hard Gold) and the thickness of Gold is required to be 3u “to 50u” because the Fingers are mainly used for multiple inserts.
When PCBS are repeatedly installed and removed, electric gold plating is used for edge connector contacts or as they are better known: the goldfinger
The goldfinger is the edge connector contact used to electroplate the solder pad to the circuit board.
The idea behind goldfinger is to help protect printed circuit board prototypes from wear and tear.If the coating is correct and of the right thickness, it is expected to last more than 1,000 times before maintenance is required.
Gold Fingers PCB Board
Goldfinger bevel default: 45 degrees, as shown below.Gold finger’s default coating does not support hard gold.
These little fingers are very versatile and have many different USES depending on their intended purpose.
Some of these USES include:
Provides a network connection to transfer data.
Connect to a dedicated adapter.
Connect different devices to the circuit board.
Can be used as an audio adapter.
Here are a few design rules for the gold finger PCB/PCB edge connector.
1. Plating area
2. Through hole plating is not allowed in.Plating area
3. There is no welding mask or screen printing.For paneling, always place the golden finger outward from the center of the panel.
4. Connect all golden fingers with a 0.008 inch edge of conductor wire for fabrication.
5. Functions can be placed on one or both sides, 25mm from the outer edge
Yongmingsheng technology co., LTD. is a high-tech company integrating circuit board development, design, proofing, production (processing), testing, production and sales.
The main products are:hard gold PCB,PCB bare board,flexible printed circuit board,reasonable price;
Since the establishment of the company, from the original professional circuit board processing, to expand the production of flexible circuit board, rigid circuit board, etc. We have been making progress, we have been committed to become a high quality PCB manufacturer and service provider.