HDI PCB 12 Layer 2 Step HDI Board | YMS PCB

Product Detail

What is HDI PCBs?

High density interconnect (HDI) PCBs represent one of the fastest-growing segments of the printed circuit board market. Because of its higher circuitry density, the HDI PCB design can incorporate finer lines and spaces, smaller vias and capture pads, and higher connection pad densities. A high-density PCB features blind and buried vias and often contains microvias that are .006 in diameter or even less.

1.Multi-step HDI enables the connection between any layers;

2.Cross-layer laser processing can enhance the quality level of multi-step HDI;

3.The combination of HDI and high-frequency materials, metal-based laminates, FPC and other special laminates and processes enable the needs of high density and high frequency, high heat conducting, or 3D assembly.

YMS HDI PCB manufacturing capabilities:

YMS HDI PCB manufacturing capabilities overview
Feature	capabilities
Layer Count	4-60L
Available HDI PCB Technology	1+N+1
	2+N+2
	3+N+3
	4+N+4
	5+N+5
	Any layer
Thickness	0.3mm-6mm
Minimum line Width and Space	0.05mm/0.05mm(2mil/2mil)
BGA PITCH	0.35mm
Min laser Drilled Size	0.075mm(3nil)
Min mechanical Drilled Size	0.15mm(6mil)
Aspect Ratio for laser hole	0.9:1
Aspect Ratio for through hole	16:1
Surface Finish	HASL, Lead free HASL,ENIG,Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP，ENEPIG.etc.
Via Fill Option	The via is plated and filled with either conductive or non-conductive epoxy then capped and plated over
	Copper filled, silver filled
	Laser via copper plated shut
Registration	±4mil
Solder Mask	Green, Red, Yellow, Blue, White, Black, Purple, Matte Black, Matte green.etc.