Best Price for 1oz/2oz/3oz Copper Fpc - Micro via PCB HDI PCB 8L 1+N+1 Via on PAD| YMSPCB – Yongmingsheng

HDI Board production process:

At present, HDI board interconnection between layer and layer is mainly the following design: Staggered holes interconnection, Cross-layer interconnection, ladder interconnection and superposition holes interconnection. Among them, the superposition holes interconnection occupy the least space. There is a research suggests that reducing the number of through holes and increasing the number of blind holes can effectively improve the wiring density. And in the superposition interconnection, the methods of electroplating and resin plug are mainly used, especially the electroplating hole filling method which has more obvious advantages like high reliability and good conduction performance. Therefore, superposition interconnection is the most widely used design method for blind holes design. The process of stacking between layers is as follows: first blind hole is made, then second blind hole is made after lamination, then multi-blind hole is made according to this method, and the interconnection between layers is realized by electroplating hole filling method.

On the whole, the production process of HDI plate is complex, which needs to be completed after many times of production for a long time. It’s not only high requirements for the accuracy and shrinkage control of each layer, but also high standards in materials, equipment, environment and technical personnel.

HDI PCB

YMS HDI PCB manufacturing capabilities:

YMS HDI PCB manufacturing capabilities overview
Feature capabilities
Layer Count 4-60L
Available HDI PCB Technology 1+N+1
2+N+2
3+N+3
4+N+4
5+N+5
Any layer
Thickness 0.3mm-6mm
Minimum line Width and Space 0.05mm/0.05mm(2mil/2mil)
BGA PITCH 0.35mm
Min laser Drilled Size 0.075mm(3nil)
Min mechanical Drilled Size 0.15mm(6mil)
Aspect Ratio for laser hole 0.9:1
Aspect Ratio for through hole 16:1
Surface Finish HASL, Lead free HASL,ENIG,Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP,ENEPIG.etc.
Via Fill Option The via is plated and filled with either conductive or non-conductive epoxy then capped and plated over
Copper filled, silver filled
Laser via copper plated shut
Registration ±4mil
Solder Mask Green, Red, Yellow, Blue, White, Black, Purple, Matte Black, Matte green.etc.

  • Best Price for 1oz/2oz/3oz Copper Fpc - Micro via PCB HDI PCB 8L 1+N+1 Via on PAD| YMSPCB – Yongmingsheng Related Video: