China Supplier Impedance Control Pcb - Metal core PCB embedded copper coin pcb Thermal Management| YMSPCB – Yongmingsheng

Product Detail

What is the PCB embedded copper coin.

The PCB embedded copper coin is the copper coin embedded in the PCB Cavity or slot after routing and metalized when finished PCB lamination. PCB and it’s copper coin tightly connected. he traditional way to dissipate heat in a printed circuit board is through thermal vias holes. But most PCB material is not particularly good for heat transfer.On other hand, some crucial components need high performacne of heat dissipation which standard via holes can not meet.The better heat dissipation is the use of a local Cu-Coin. This can be a Bonded Cu-Coin, Press-Fit Cu-Coin or Embedded Cu-Coin.

The methods of dissipating heat for PCB

YMS Metal core PCB manufacturing capabilities:

YMS Metal core PCB manufacturing capabilities overview
Feature	capabilities
Layer Count	2-60L
Available Metal core PCB Technology	Bonded Cu-Coin, Press-Fit Cu-Coin ,Embedded Cu-Coin.etc.
	buried and blind via,laser via
	Hybrid	High Frequency Material such as RO4350B and FR4 Mix etc.
		High Speed Material such as M7NE and FR4 Mix etc.
Material	CEM-	CEM-1;CEM-2；CEM-4；CEM-5.etc
	FR4	EM827, 370HR, S1000-2, IT180A, IT158, S1000 / S1155, R1566W, EM285, TU862HF,NP170G etc.
	High Speed	Megtron6, Megtron4, Megtron7,TU872SLK, FR408HR,N4000-13 Series,MW4000,MW2000,TU933 etc.
	High Frequency	Ro3003, Ro3006, Ro4350B, Ro4360G2, Ro4835, CLTE, Genclad, RF35, FastRise27 etc.
	Others	Polyimide, Tk, LCP, BT, C-ply, Fradflex, Omega , ZBC2000,PEEK,PTFE,ceramic-based etc.
Thickness	0.8 mm min
Coin material Thickness	0.8-3.0mm
Minimum line Width and Space	0.05mm/0.05mm(2mil/2mil)
BGA PITCH	0.35mm
Min Copper coin’s clearance	1.0mm min
Min mechanical Drilled Size	0.15mm(6mil)
Aspect Ratio for through hole	16：1
Surface Finish	HASL, Lead free HASL,ENIG,Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP，ENEPIG.etc.
Via Fill Option	The via is plated and filled with either conductive or non-conductive epoxy then capped and plated over(VIPPO)
	Copper filled, silver filled
	Laser via copper plated shut
Registration	±4mil
Solder Mask	Green, Red, Yellow, Blue, White, Black, Purple, Matte Black, Matte green.etc.