Innovation, excellent and reliability are the core values of our business. These principles today additional than ever form the basis of our success as an internationally active mid-size firm for Reasonable price China 2 Layer High Quality PCB with Cheap Price Used for Taxi Electronics, Our goods are strictly inspected before exporting , So we gain a excellent reputation all over the world. We seeking forward to cooperation along with you within the long term.
Innovation, excellent and reliability are the core values of our business. These principles today additional than ever form the basis of our success as an internationally active mid-size firm for 2 Layer PCB, China PCB, We insist on the principle of “Credit being primary, Customers being the king and Quality being the best”, we are looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.
Material | TG | MOT |
FR4-standard-TG | 130°C | 110°C |
FR4-mittel-TG | 150°C | 130°C |
FR4-hoch-TG | 170°C | 150°C |
Polyimid-Super-hoch-TG-Material | 250°C | 230°C |
ome common high-frequency materials do not mention TGs in their datasheets. This is due to the original meaning of TG: “temperature of glass transition”. Many ceramics- or PTFE-based materials do simply not contain any glass fibres and therefore have no technical TG. Generally, this fact also applies to Polyimides (PI). However, you can usually assume a TG of at least 200°C for Polyimide, ceramics or PTFE-materials. In this case the TG simply stands for temperature resistance.
You may apply the following values:
Material type | Typical „TG“ |
CEM1 | 110-130°C |
FR4 | 120-180°C |
PTFE | 200-260°C |
Ceramic | 200-300°C |
Polyimide | 200-350°C |
YMS High Tg PCB manufacturing capabilities overview |
||
Feature | capabilities | |
Layer Count | 3-60L | |
Available Multilayer PCB Technology | Through hole with Aspect Ratio 16:1 | |
buried and blind via | ||
Hybrid | High Frequency Material such as RO4350B and FR4 TG 180°Mix etc. | |
High Speed Material such as M7NE and FR4 TG 180°Mix etc. | ||
Thickness | 0.3mm-8mm | |
Minimum line Width and Space | 0.05mm/0.05mm(2mil/2mil) | |
BGA PITCH | 0.35mm | |
Min mechanical Drilled Size | 0.15mm(6mil) | |
Aspect Ratio for through hole | 16:1 | |
Surface Finish | HASL, Lead free HASL,ENIG,Immersion Tin, OSP, Immersion Silver, Gold Finger, Electroplating Hard Gold, Selective OSP,ENEPIG.etc. | |
Via Fill Option | The via is plated and filled with either conductive or non-conductive epoxy then capped and plated over(VIPPO) | |
Copper filled, silver filled | ||
Registration | ±4mil | |
Solder Mask | Green, Red, Yellow, Blue, White, Black, Purple, Matte Black, Matte green.etc. |